I know this is a long shot but I am hoping someone may be able to assist me with a technical related query....
I require parts to fit a 1995 Nissan Largo 2.0 Diesel 4WD (import)
I require front (LHS and RHS) wishbone bush or better still, complete front wishbone (inc bush) as I have been informed this is easier to install.
If this part is not available (and believe me I have tried), would someone be able to confirm if a similar part is available from another Nissan model as I have heard (and read) but not had it confirmed that the Nissan Serena may do the job?
I have tried local garages and also online 'specialist' imports/breakers but to no avail - I did find one in Birmingham who assured me they had the exact part I required but they turned out to be a wild goose chase!!!
I have also emailed the main Nissan dealer but they haven't got a Largo on the database so unable to check for parts!!
For a vehicle I have owned since 2012 and found it easy to get other parts for (via a very good local garage), these wishbone/bushes seem to be rarer than hens teeth!
With thanks....
Parts required for Nissan Largo 2.0 Diesel 4WD
-
- dipstick
- Posts: 13
- Joined: 05 Nov 2014, 11:27
- Fuel: Diesel
- Drivetrain: 4WD
- Seats: 8 Seats
- Roof: Glass Top
- tttonyyy
- SUPER CAR
- Posts: 859
- Joined: 17 Jan 2014, 13:13
- Fuel: Biodiesel
- Drivetrain: 2WD
- Seats: 7 Seats
- Roof: Glass Top
- Trim: Highway Star
- Mods: 2x Highway Stars
2wd with 7 spoke alloys, replacement speakers and sub in the boot. Awaiting repair after crashing it. :(
4wd also glass top with white alloys.
Can never have too many Largos!
Re: Parts required for Nissan Largo 2.0 Diesel 4WD
Hiya which bush do you need?
The lower arm is sold by Nissan as a whole assembly and from them you can't buy just the bushes.
If it's the trailing bush then I just fitted this one to one of my Largos:
http://www.ebay.co.uk/itm/201122724722
Be warned though that the bolts into the underbody are incredibly tight (breaker bar with scaffold pole on tight).
For the other one at the front looking at it I'd say best bet is to melt the steel tube out with a blowtorch then saw out the rest, and find a suitable polybush for it.
The lower arm is sold by Nissan as a whole assembly and from them you can't buy just the bushes.
If it's the trailing bush then I just fitted this one to one of my Largos:
http://www.ebay.co.uk/itm/201122724722
Be warned though that the bolts into the underbody are incredibly tight (breaker bar with scaffold pole on tight).
For the other one at the front looking at it I'd say best bet is to melt the steel tube out with a blowtorch then saw out the rest, and find a suitable polybush for it.
-
- dipstick
- Posts: 13
- Joined: 05 Nov 2014, 11:27
- Fuel: Diesel
- Drivetrain: 4WD
- Seats: 8 Seats
- Roof: Glass Top
Re: Parts required for Nissan Largo 2.0 Diesel 4WD
Thanks for the reply....
Unfortunately I am no mechanic so I have sent the reply to him, plus some other info I've come across on the forum regarding these wishbone/bushes.....
Fingers crossed as trying to keep 'Liam' Nissan on the road
Unfortunately I am no mechanic so I have sent the reply to him, plus some other info I've come across on the forum regarding these wishbone/bushes.....
Fingers crossed as trying to keep 'Liam' Nissan on the road
-
- top forum poster
- Posts: 1138
- Joined: 02 Dec 2013, 22:46
- Fuel: Diesel
- Drivetrain: 2WD
- Seats: 7 Seats
- Roof: Tin Top
- Trim: highway star
Re: Parts required for Nissan Largo 2.0 Diesel 4WD
the bushes your after are listed for serena wishbone bushes on ebay,hope this helps,fsk6708 and fsk6709
-
- dipstick
- Posts: 13
- Joined: 05 Nov 2014, 11:27
- Fuel: Diesel
- Drivetrain: 4WD
- Seats: 8 Seats
- Roof: Glass Top
Re: Parts required for Nissan Largo 2.0 Diesel 4WD
Thanks for the update... I have sent this to my mechanic so am waiting for a response